Comprehensive LF-to-RF network analysis

The E5061B-3L5 LF-RF NA option offers versatile network analysis in the broad frequency range from 5 Hz to 3 GHz. Comprehensive LF network measurement capabilities including built-in 1 MΩ inputs have been seamlessly integrated with the high-performance RF network analyzer. The E5061B-3L5 is the right solution for component and circuit evaluations in the R&D environment.

E5061B-3L5 LF-RF network analyzer option + 005 Impedance analysis option - NA plus ZA in one box

The E5061B-005 provides the impedance analysis (ZA) firmware for the E5061B-3L5 LF-RF network analyzer. This option enables the analyzer to measure impedance parameters of electronic components such as capacitors, inductors, and resonators. The combination of NA and ZA capabilities further enhances the analyzer’s versatility as a general R&D tool. Basic ZA functionalities including fixture compensation and equivalent circuit analysis are supported by the firmware. The DC biased impedance measurement is possible with the built-in DC bias source provided by the E5061B-3L5.

NOTE:
The E5061B does not support the control function for the discontinued 87075C/87050E multiport test set via parallel port.

E5061B-3L5 

LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz  

E5061B-005 

Impedance analysis for LF-RF network analyzer  

E5061B-010 

Time domain/fault location analysis  

E5061B-020 Standard hard disk drive 

E5061B-115 

Transmission/Reflection test set, 100 kHz to 1.5 GHz, 50 ohm system impedance  

E5061B-117 

Transmission/Reflection test set, 100 kHz to 1.5 GHz, 75 ohm system impedance  

E5061B-135 

Transmission/Reflection test set, 100 kHz to 3 GHz, 50 ohm system impedance  

E5061B-137 

Transmission/Reflection test set, 100 kHz to 3 GHz, 75 ohm system impedance  

E5061B-1A7 Calibration + Uncertainties + Guardbanding 

E5061B-1CM Rack mount kit 

E5061B-1CN Front handle kit 

E5061B-1CP Rack mount and front handle kit 

E5061B-1E5 High stability timebase 

E5061B-215 

S-parameter test set, 100 kHz to 1.5 GHz, 50 ohm system impedance  

E5061B-217 

S-parameter test set, 100 kHz to 1.5 GHz, 75 ohm system impedance  

E5061B-235 

S-parameter test set, 100 kHz to 3 GHz, 50 ohm system impedance  

E5061B-237 

S-parameter test set, 100 kHz to 3 GHz, 75 ohm system impedance